رد کردن لینک ها

ADAPTORS REDUCERS & STOPPING PLUGS

ADAPTORS REDUCERS & STOPPING PLUGS

ADAPTORS REDUCERS & STOPPING PLUGS

Suitable for both industrial use and in either zone 1 or zone 2 approved equipment having
flameproof Ex d, increased safety Ex’e’, or NON – Incentive Ex’n/Ex’nR’ methods of protection

“Ex d IIC/Ex e IIC,Ex t IIIC” in accordance with the relevant requirments of
IEC 60079-0 , IEC 60079-1, IEC 60079-7 , IEC 61241-0 , IEC 61241-1, IEC 60079-31

Component certificate No. : TÜV 11 ATEX 7157 U and equipment certificate No. TÜV11 ATEX 7156 X

Provids a means of outdoor or indoor connection between cable entry device and equipment having
dissimilar threads

IP 66 TO BS EN 60529

Brass, aluminum, mild & stainless steel

May be coated or plated to suit the application

See thread conversion table

Surface engraving

For hazardous area application S.E.M.C. range of Adaptors, Reducers, & Stopping Plugs can be
supplied as Certified Components appropriate for use on areas classified as Zone I or Zone II
in conjunction with any equipment Certified as Flameproof Exd, Increased Safety Exe, or
Non Incentive Exn / ExnR
The following considerations shall be taken into account while using Certified Adaptors
Reducers, & Stopping Plugs as well as Good engineering practices
For any cable entry, only one thread convertor ( Adaptor or Reducer ) can be used
Stopping Plugs are not permitted to be fitted into an Adaptor or Reducer. They should directly
be fitted into unplugged / unused cable entries of the equipment.
Female entry threads of adaptors, can only be one step greater than the nominal size of the
male thread form
S.E.M.C. range of Adaptors , Reducers, & Stopping Plugs cover the most popular international
thread forms including: Metric, Imperial, NPT, PG, BSPP,and BSPT

برای مشاهده کاتالوگ محصول بر روی لینک زیر کلیک کنید

Ex Adaptors,Reducers,Stopping Plugs

برای مشاهده گواهی نامه محصول بر روی لینک زیر کلیک کنید

 

TUV 11 ATEX 7155 X

برای مشاهده نحوه نصب محصول بر روی لینک زیر کلیک کنید

 

MARK I MARK II MARK III MARK IV MARK V MARK VI

بازگشت به بالای صفحه